Categories
Writers Solution

The Great Inventory Correction

  • Discussion Replies: The Great Inventory Correction

reply to 2 of your peers.  

Each reply must demonstrate a substantive discussion and facilitate discussion among participants.

 student must then post 2 replies of at least 250 words  

For each thread, students must support their assertions with at least 2 peer-reviewed journal articles in current APA format. The thread must include a reference list, and each question/answer must be delineated under an APA heading. Each reply must demonstrate a substantive discussion.

Discussion Thread: The Great Inventory Correction

Sylvia Lloyd

School of Business, Liberty University

Author Note

Sylvia Lloyd

I have no known conflict of interest to disclose.

Correspondence concerning this article should be addressed to

Sylvia Lloyd. Email: salloyd2@liberty.edu

2

DISCUSSION THREAD: THE GREAT INVENTORY CORRECTION 2

Discussion Thread: The Great Inventory Correction

The external environment is dynamic and ever-changing. The supply-chain industry is not exempt from these changes as customer demand fluctuates or disruptions occur within the supply chain. These issues, along with a competitive environment, require businesses to focus on finding ways to optimize their revenue. In addition to managing cash flow, controlling inventory costs is essential. Remco (2020) posited that management resiliency when dealing with issues in the supply chain helps to lower the negative impact of disruptions that may occur. This discussion will review the changes three businesses made to counter inventory issues.

Altera’s Modified Strategy

Because of a decrease in customer demand, Altera changed its inventory process. As part of the change, the company decided to delay the production of its components by storing them rather than “packaging and testing” them (Simchi-Levi et al., 2021, p. 188). They would then resume testing and ship the components only after verifying an order. Regarding their “mature” (p. 188) parts, Altera would build those as ordered. Lastly, they discontinued producing their products without having a customer purchase them. They would now require an order before creating a product. The changes were necessary because Altera had excess inventory on hand due to a decrease in customer demand. As a result, the company had to write off over a hundred million dollars worth of inventory, which affected its profitability.

Assessment of Altera’s New Strategy

I agree that Altera’s new strategy using dies will be successful, as previous studies on inventory management strategies support this assessment. Kim et al. (2022) discuss steps similar to Alera delaying its production and refer to it as a postponement strategy. The authors mentioned that postponing the production of dies is effective as it helps a business have less inventory. This method is advantageous because it allows a manufacturer to contain its expenses as it reduces or eliminates excess inventory. They said that implementing a system using dies to store products promotes responsiveness whenever there is a change in demand. Also, Rau et al. (2021) noted that a postponement strategy allows a business to better manage in times of uncertainty.

A disadvantage of postponing the production of items is that only products are available once they are created (Kim et al., 2022). The postponement method is an example of what Simchi-Levi et al. (2021) discussed, as they mentioned the “push-pull supply chain” method (p. 174). A drawback mentioned was that it could be challenging to implement when lead times are longer.

Assessment of Customers’ Reaction to New Strategy

Altera’s customers may initially not understand the new strategy, as change is often complicated, and people resist it. A disadvantage could be a decrease in customer satisfaction as they may panic because products will not be ready for them immediately, and an order must be completed first. An advantage of the new strategy is cost savings for the customers because Altera will no longer have the expense of storing inventory.

Information Flextronics Possesses Over its Clients

Flextronics had historical information on inventory and the items they produced (Simchi-Levi et al., 2021). They had this information as they did business with several clients. Their vice president commented on other companies that experienced issues going through the supply chain cycle as he said they failed to review historical information.

Leveraging the Information

Flextronics can use the information to leverage its ability to forecast customer demand. Bedi and Toshniwal (2019) said that using historical data and current observations aids in better prediction. If Flextronics successfully forecasts customer demand, it could aid in decreasing its inventory-related expenses.

IBM’s Management of its Suppliers for an Effective Pull Strategy

IBM manages its suppliers by working with a small number of suppliers, each assigned based on the product type (Simchi-Levi et al., 2021). Because the pull strategy is based on verified demand, costs are lower as inventory levels are reduced (Simchi-Levi et al., 2021; Xanthopoulos & Koulouriotis, 2021). Because they work with fewer suppliers, IBM can also manage their resources better, as Simchi-Levi et al. (2021) indicated this advantage.

References

Bedi, J., & Toshniwal, D. (2019). Deep learning framework to forecast electricity demand.  Applied Energy, 238, 1312-1326.  https://doi.org/10.1016/j.apenergy.2019.01.113

Kim, D., Park, Y. S., Kim, H. W., Park, K. S., & Moon, I. K. (2022). Inventory policy for postponement strategy in the semiconductor industry with a die bank.  Simulation Modelling Practice and Theory, 117, 102498.  https://doi.org/10.1016/j.simpat.2022.102498

Rau, H., Daniel Budiman, S., & Monteiro, C. N. (2021). Improving the sustainability of a reverse supply chain system under demand uncertainty by using postponement strategies.  Waste Management (Elmsford), 131, 72-87.  https://doi.org/10.1016/j.wasman.2021.05.018

Remko, V. H. (2020). Research opportunities for a more resilient post-COVID-19 supply chain – closing the gap between research findings and industry practice. International Journal of Operations & Production Management, 40(4), 341-355.  https://doi.org/10.1108/IJOPM-03-2020-0165

Simchi-Levi, D., Kaminsky, P., & Simchi-Levi, E. (2021). Designing and managing the supply chain: Concepts, strategies, and case studies [E-Book]. In McGraw-Hill eBooks (4th ed.). McGraw Hill.

Xanthopoulos, A. S., & Koulouriotis, D. E. (2021). A comparative study of different pull control strategies in multi-product manufacturing systems using discrete event simulation.  Advances in Production Engineering & Management, 16(4), 473-484.  https://doi.org/10.14743/apem2021.4.414

WE HAVE DONE THIS QUESTION BEFORE, WE CAN ALSO DO IT FOR YOU

GET SOLUTION FOR THIS ASSIGNMENT, Get Impressive Scores in Your Class on The Great Inventory Correction

TO BE RE-WRITTEN FROM THE SCRATCH

Categories
Writers Solution

global linked list in memory to manage the inventory for the items on-hand within a store

Language (or Software): C++

Create simple store inventory tracking system will use a global linked list in memory to manage the inventory for the items on-hand within a store. Your program must use of the “list” API in the C++sta ndard template library (STL). Your program must keep track of a list of inventory items in a global linked list data structure and must implement at least one class, which will hold the following class variable:
An integer variable to hold the Stock Keep Unit (SKU) number for the item. This must be a randomly generated number that consists of exactly six digits. Duplicate entries are not allowed.
A string variable to hold the name of the item.
An integer variable to hold the number of items in stock.
A double variable to hold the price of an individual item.
A string variable to hold the date that the item was last ordered. The entered date must be in the form mm/dd/yyyy. If the user enters an invalid date format, print an error and re-prompt the user to enter the date in correct format.
Provide the appropriate accessor methods to set and get the data for these class variables. For example getDateLastOrder() and setDateLastOrder(string dateLastOrdered). The main program must provide the following functionality:
1. When the program is first started, it must read a data file called inventory.dat. If the file exists, the program will load the data for each item record into the global inventory linked list data structure.
2. When the program exits, it must save all of the entries within the global linked list into the inventory.dat data file. At this point, if the file does not exist, the program will create it.
3. Provide a simple text-based user interface to allow the user to operate on the inventory linked list. Note that each item record must be placed in a global linked list that holds all of the information for each item in inventory. The program interface will allow the user to do the following:
(a) Enter an item – allows the user to enter all fields except the SKU number field, which
will be automatically generated random six-digit number. After the data fields are entered, the program will place the record in the global linked list.
(b) Search for an item – allows the user to search for an item based on a user provided
SKU number. Display a message if the item is not found in the inventory linked list.
(c) Modify an item – allows the user to modify any of the fields for an item (except for
the SKU number) in the linked list for given record as indicated by the SKU number.
Display a message if the item is not found in the inventory linked list.
(d) Delete an item – allows the user to delete an item from the inventory linked list using
the SKU number as the key. Display a message if the item is not found in the
inventory linked list.
(e) Display inventory – displays all of the items in the linked list. After displaying all of
the items, the program will provide a total cost of the inventory based on the quantity
and price for each item.
(f) Exit program – Saves all of the items in the inventory and then exists the program

GET THE COMPLETED ASSIGNMENT

ASSIGNMENT COMPLETED AT CapitalEssayWriting.com

MAKE YOUR ORDER AND GET THE COMPLETED ORDER

CLICK HERE TO ORDER THIS PAPER AT CapitalEssayWriting.com on global linked list in memory to manage the inventory for the items on-hand within a store

NO PLAGIARISM, Get impressive Grades in Your Academic Work

Categories
Writers Solution

Clark Healthy Workplace Inventory to diagnose potential problems with the civility of your organization

Assignment: Workplace Environment Assessment

Clearly, diagnosis is a critical aspect of healthcare. However, the ultimate purpose of a diagnosis is the development and application of a series of treatments or protocols. Isolated recognition of a health issue does little to resolve it.

In this module’s Discussion, you applied the Clark Healthy Workplace Inventory to diagnose potential problems with the civility of your organization. In this Portfolio Assignment, you will continue to analyze the results and apply published research to the development of a proposed treatment for any issues uncovered by the assessment.

The Assignment (3-6 pages total):

Part 1: Work Environment Assessment (1-2 pages)

  • Review the Work Environment Assessment Template you completed for this Module’s Discussion.
  • Describe the results of the Work Environment Assessment you completed on your workplace.
  • Identify two things that surprised you about the results and one idea you believed prior to conducting the Assessment that was confirmed.
  • Explain what the results of the Assessment suggest about the health and civility of your workplace.

Part 2: Reviewing the Literature (1-2 pages)

  • Briefly describe the theory or concept presented in the article(s) you selected.
  • Explain how the theory or concept presented in the article(s) relates to the results of your Work Environment Assessment.
  • Explain how your organization could apply the theory highlighted in your selected article(s) to improve organizational health and/or create stronger work teams. Be specific and provide examples.

Part 3: Evidence-Based Strategies to Create High-Performance Interprofessional Teams (1–2 pages)

  • Recommend at least two strategies, supported in the literature, that can be implemented to address any shortcomings revealed in your Work Environment Assessment.
  • Recommend at least two strategies that can be implemented to bolster successful practices revealed in your Work Environment Assessment.
Categories
Writers Solution

Compare and contrast the just-in-time approach with the more traditional approach to managing inventory and manufacturing

Instructions: Each written paper requires in-depth and detailed responses to the assignment question(s). The written papers need to reference the text materials in the content of the paper as well as the Reference Page. You must ensure you reference and cite a source if you paraphrase or quote directly from an author or source. Likewise, written papers include real-world examples to support any general points. Keep your submissions clear, concise, focused, and succinct. Quality is preferred and not quantity of verbiage. Each written paper must be:

□ 2-3 pages maximum (500-700 words)□ APA format □ Title page, introduction, conclusion, and reference page (no short answer format)Answer the following:

1. Compare and contrast the just-in-time approach with the more traditional approach to managing inventory and manufacturing. You must include a title page, introduction, conclusion, and reference page

WE HAVE DONE THIS ASSIGNMENT BEFORE, WE CAN ALSO DO IT FOR YOU

GET SOLUTION FOR THIS ASSIGNMENT, Get Impressive Scores in Your Class

CLICK HERE TO MAKE YOUR ORDER on Compare and contrast the just-in-time approach with the more traditional approach to managing inventory and manufacturing

Are You looking for Assignment and Homework Writing help? We Provide High-Quality Academic Papers at Affordable Rates. No Plagiarism.

TO BE RE-WRITTEN FROM THE SCRATCH

Categories
Writers Solution

Clark Healthy Workplace Inventory to diagnose potential problems with the civility of your organization

Assignment: Workplace Environment Assessment
Clearly, diagnosis is a critical aspect of healthcare. However, the ultimate purpose of a diagnosis is the development and application of a series of treatments or protocols. Isolated recognition of a health issue does little to resolve it.
In this module’s Discussion, you applied the Clark Healthy Workplace Inventory to diagnose potential problems with the civility of your organization. In this Portfolio Assignment, you will continue to analyze the results and apply published research to the development of a proposed treatment for any issues uncovered by the assessment.
To Prepare:
Review the Resources and examine the Clark Healthy Workplace Inventory, found on page 20 of Clark (2015).
Review the Work Environment Assessment Template.
Reflect on the output of your Discussion post regarding your evaluation of workplace civility and the feedback received from colleagues.
Select and review one or more of the following articles found in the Resources:
Clark, Olender, Cardoni, and Kenski (2011)
Clark (2018)
Clark (2015)
Griffin and Clark (2014)
The Assignment (3-6 pages total):
Part 1: Work Environment Assessment (1-2 pages)
Review the Work Environment Assessment Template you completed for this Module’s Discussion.
Describe the results of the Work Environment Assessment you completed on your workplace.
Identify two things that surprised you about the results and one idea you believed prior to conducting the Assessment that was confirmed.
Explain what the results of the Assessment suggest about the health and civility of your workplace.
Part 2: Reviewing the Literature (1-2 pages)
Briefly describe the theory or concept presented in the article(s) you selected.
Explain how the theory or concept presented in the article(s) relates to the results of your Work Environment Assessment.
Explain how your organization could apply the theory highlighted in your selected article(s) to improve organizational health and/or create stronger work teams. Be specific and provide examples.
Part 3: Evidence-Based Strategies to Create High-Performance Interprofessional Teams (1–2 pages)
Recommend at least two strategies, supported in the literature, that can be implemented to address any shortcomings revealed in your Work Environment Assessment.
Recommend at least two strategies that can be implemented to bolster successful practices revealed in your Work Environment Assessment.
By Day 7 of Week 9
Submit your Workplace Environment Assessment Assignment.
Submission and Grading Information
To submit your completed Assignment for review and grading, do the following:
Please save your Assignment using the naming convention “WK9Assgn+last name+first initial.(extension)” as the name.
Click the Week 9 Assignment Rubric to review the Grading Criteria for the Assignment.
Click the Week 9 Assignment link. You will also be able to “View Rubric” for grading criteria from this area.
Next, from the Attach File area, click on the Browse My Computer button. Find the document you saved as “WK9Assgn+last name+first initial.(extension)” and click Open.
If applicable: From the Plagiarism Tools area, click the checkbox for I agree to submit my paper(s) to the Global Reference Database.
Click on the Submit button to complete your submission.
COMPUNSARY READING RESOURCE
Fostering Civility in Nursing Education and Practice: Nurse Leader Perspectives
Clark, Cynthia M. PhD, RN, ANEFOlender, Lynda MS, RN, ANP, NEA-BCCardoni, Cari BSNKenski, Diane BSNAuthor Information
ShareCiteReusePDF
Full-featured View
Article
PDF
Complete Reference
Abstract
Incivility in healthcare can lead to unsafe working conditions, poor patient care, and increased medical costs. The authors discuss a study that examined factors that contribute to adverse working relationships between nursing education and practice, effective strategies to foster civility, essential skills to be taught in nursing education, and how education and practice can work together to foster civility in the profession.
The work of nursing is 4 times more dangerous than most other occupations,1 and nurses experience work-related crime at least 2 times more often than any other healthcare provider.2 Root causes for workplace violence are multifaceted and include work-related stress due in part to an increasingly complex patient population and workload and deteriorating interpersonal relationships at the bedside.1 When normalized or left unaddressed, these uncivil and disruptive behaviors may emerge into an incivility spiral,3 depicted along a continuum from an unintentional act leading to intentional retaliation, escalating to workplace bullying and even violence.4 Incivility and disruptive behaviors have been identified both in the academic5-7 and clinical settings8-10; however, no direct study of incivility between the 2 environments has been made.Review of the LiteratureIncivility and disruptive behavior in nursing education and practice are common,4,9 on the rise,11 and frequently ignored.12 Two decades ago, Boyer13 noted several challenges facing institutions of higher education, including academic incivility. Although incivility in the academic setting is not a new phenomenon, the types and frequency of misbehavior are increasing and have become a significant problem in higher education, including nursing education. Clark and Springer14,15 explored faculty and student perceptions of incivility in nursing education and found negative behaviors to be commonplace and exhibited by students and faculty alike. The majority of respondents (71%) perceived incivility as a moderate to serious problem and reported that stress, high-stake testing, faculty arrogance, and student entitlement contributed to incivility.14 More than half of the respondents reported experiencing or knowing about threatening student encounters between students or faculty.14A small but growing body of research suggests that incivility and disruptive behaviors are particularly commonplace to the new graduate nurse or nursing student within the clinical setting.10 Paralleling incivility in the academic setting, staff nurses are also vulnerable to bullying, defined as negative behavior that is systematic in nature and purposefully targeted at the victim over a prolonged time frame with the intent to do harm.16 These findings are also supported by a recent Joint Commission (TJC) survey17 reporting that more than 50% of nurses are victims of disruptive behaviors including incivility and bullying, and more than 90% of nurses stated witnessing abusive behaviors of others in the workplace. Likened to the concept of nurses -eating their young-,18 the findings of several studies suggest that these negative behaviors are a learned process, transferred through staff nurses to new nurses and student nurses via interaction within the hierarchical nature of the profession.10Incivility and disruptive behaviors may also be normalized or perpetuated by organizational culture,12,18 particularly during times of restructuring or downsizing. This is suggested to be secondary to unclear roles and expectations, professional and personal value differences, personal vulnerabilities, and power struggles common within organizations during periods of change.18 Other consequences of incivility include heightened stress levels, physiological and psychological distress,5 job dissatisfaction,10,19 decreased performance,20 and turnover intention.21Bartholomew18 noted that uncivil behaviors may contribute to the exodus of new graduates leaving their first job within 6 months. If disruptive behaviors are tolerated, nurses may leave the profession altogether.21 Disruptive and bullying behaviors have been identified as a root cause of more than 3,500 sentinel events over a 10-year time frame22 and contribute to an annual estimate of 98,000 to 100,000 patients dying secondary to medical errors in hospitals.23,24 Collectively, these findings led TJC17 to intervene and release a sentinel event alert calling for zero tolerance of intimidating and bullying behaviors.Conceptual FrameworkClark5 developed a conceptual model to illustrate how heightened levels of nursing faculty and student stress, combined with attitudes of student entitlement and faculty superiority, work overload, and a lack of knowledge and skills, contribute to incivility in nursing education. This conceptual model has been adapted to reflect the stressors that contribute to incivility in both nursing education and practice (Figure 1). Factors that contribute to stress in nursing practice are similar to the stressors experienced in nursing education including work overload, unclear roles and expectations, organizational conditions, and a lack of knowledge and skills. Moreover, in both practice and academia, stress is mitigated by leaders who role model professionalism and utilize effective communication skills.25 The importance of modeling effective communication and related education to address incivility cannot be underestimated, can reduce its incidence and effects,26 and can assist in fostering cultures of civility.6undefined undefined
Figure 1
Conceptual model for fostering civility in nursing education (adapted for nursing practice).Nurse Leaders’ SurveyMindful of the need to enhance the culture of civility both in the academic and clinical settings, a descriptive qualitative study was conducted. The purpose of the study was to gather practice-based nursing leaders’ perceptions about factors that contribute to an adverse working relationship between nursing education and practice, the most effective strategies needed to foster civility, the skills needed to be taught in nursing education, and how nursing education and practice can work together to foster civility in the nursing workplace.Procedure and AnalysisThe survey was developed by the author (C.M.C.) and included 4 open-ended questions designed to garner nurse leaders’ perceptions on ways to foster civility in nursing education and practice. The questions were constructed based on a comprehensive review of the literature on incivility and numerous empirical studies. Two other researchers reviewed the survey for content validity and logical construction. Institutional approval to conduct the study was obtained. The surveys were administered to nurse leaders attending a statewide nursing conference using a paper method for gathering narrative, handwritten responses. Once the study was clearly explained, the respondents provided consent and voluntarily completed the survey. Aside from indicating their employment position, no demographic information was gathered about the participants. The survey contained 4 questions:
What factors contribute to an adverse working relationship between nursing education and practice?
What are the most effective strategies for fostering civility in the practice setting?
What essential skills need to be taught in nursing education to prepare students to foster civility in the practice setting?
How can nursing education and practice work together to foster civility in the practice setting?
The sample consisted of 174 nurse leaders: 68 (39.1%) nurse executives and 106 (60.9%) nurse managers who were attending a statewide conference held in a large western state. The respondents were recruited by the researcher (C.M.C.), who explained the purpose of the study during the keynote address. The surveys were collected and prepared for analysis.Textual content analysis was used to manually analyze the respondents’ narrative responses. Key words or phrases were quantified by the researchers; inferences were made about their meanings and categorized into themes. Two members of the research team reviewed the nurse leaders’ comments independently to quantify the recurring responses and organize them into themes. Then, 2 other research members reviewed the comments. Areas of theme agreement and disagreement were discussed, and verbatim comments were reviewed until all researchers were confident that the analysis was a valid representation of the comments.FindingsAnalyses of the narrative responses from the participants were organized into themes, ranked in order of the number of responses, and described according to each research question. The first research question asked nurse leaders to identify factors that contribute to an adverse working relationship between nursing education and practice. Both groups identified a noticeable gap between nurses in education and practice (Table 1). Nurse executives reported nurse educators failing to keep pace with practice changes, lacking familiarity with practice regulations and standards, being slow to respond with curricular changes, and a lack of shared goals between nurses in education and practice. Nurse managers reported similar findings, but suggested that a limited number of nursing faculty, a highly stressed work environment, and lack of adequate resources also contributed to adverse working relationships. These reported deficits resulted in the perception that students were not being adequately prepared for practice.undefined undefined
Table 1. Factors Contributing to an Adverse Working Relationship Between Nursing Education and Practicea
The second research question asked the respondents to identify the most effective strategies for fostering civility in the practice setting. Nurse executives identified 4 major themes, and nurse managers identified 7 themes, listed in Table 2. Strategies that rendered less than 10 responses are not listed in the table. For nurse executives, these themes included holding self and others accountable for acceptable behaviors, addressing incivility in nursing education programs, implementing stress reduction strategies, making civility a requirement for hiring, and conducting institutional assessments to measure incivility. Nurse managers’ responses to this question were similar to those of nurse executives. Notable differences between the 2 groups were nurse executives’ recommendations for civility teaching starting at the education level, civility as a requirement for hiring, and ongoing civility assessment. Nurse managers’ responses differing from executives were establishing a healthy work environment, ongoing practice-preparedness education, and reinforcing positive behavior.undefined undefined
Table 2. Strategiesa for Fostering Civility in the Practice Setting
The third research question asked the respondents to identify essential skills that need to be taught in nursing education programs to prepare students to foster civility in the practice setting (Table 3).undefined undefined
Table 3 Essential Skillsa Needed to Prepare Students to Foster Civility in the Practice Setting
Nurse executives identified 4 major themes, and nurse managers identified 8 themes. Strategies that rendered less than 10 responses are not listed in the table. For nurse executives, these themes included reflective practice and critical thinking, respect for diversity, and stress reduction strategies. Nurse mangers had similar responses for essential skills and also suggested critical-thinking skill sets (time management, decision-making, and problem-solving skills), organizational culture of civility, and civility education.The final research question asked nurse leaders for strategies about how nursing education and practice can work together to foster civility in the practice setting (Table 4). Both groups identified 5 major themes. Once again, strategies that rendered less than 10 responses are not listed in the table. For nurse executives, these themes included making civility a requirement for hiring, teaching conflict resolution and managing difficult situations, implementing stress reduction strategies, and conducting institutional assessments to measure incivility. Teaching civility was identified only by nurse executives, and themes identified only by nurse managers were mentorship, professionalism, and reinforcing and rewarding civility. Nurse managers also suggested focusing on patient care and safety and implementing stress reduction strategies ( 10 responses).undefined undefined
Table 4 How Nursing Education and Practice Can Work Together to Foster Civility in the Practice Settinga
At both the organizational level and unit levels, nurse leaders in practice noted the importance of having a shared vision of civility and underscored the importance of adopting and implementing codes of conduct and effective policies and procedures. Both nurse executives and managers expressed the need for effective communication and collaboration, positive role modeling, and the importance of vigilant and purposeful hiring with civility in mind.DiscussionThe applicability of Clark and Olender’s (Figure 1) conceptual model for fostering civility in nursing academic and clinical practice environments is supported by the results of this study. Indeed, results suggest an increased awareness of stressors likely contributing to a culture of incivility by these nursing leaders. As depicted in the model, and as Table 2 denotes, the implementation of strategies to reduce stressors (such as policy and procedure, education, and self-care initiatives) is a key objective for the establishment of a culture of civility. A high percentage of nursing leaders emphasized the importance of a collaborative vision and partnership between education and practice to meet this goal. This vision could emerge via joint education and practice meetings that focus on designing up-to-date and relevant curricula that reflect current practice standards with emphasis on civility education and teamwork. Ideally, this would result in the development and implementation of comprehensive, well-defined, nonpunitive policies and procedures that focus on civility, are widely disseminated, and have measurable outcomes. An emphasis on individual accountability at all organizational levels, as well as organizational adoption of a culture of civility, would be required for policies to be effective. In addition, leadership mindfulness and intentionality toward positive role modeling, professionalism, collaboration, teamwork, and ethical conduct would be required. Related competencies would be reinforced and practiced through simulation and role playing, in real time, and inclusion of these skills within competency assessment systems.Our findings lend support to studies indicating that stress is a major contributor to incivility1,5,14,15,19; thus, it is important to integrate self-care and stress reduction into daily activities. The American Holistic Nurses Association27 recommends several stress management techniques including enjoying the company of family, friends, and other supportive people; getting regular exercise and adequate sleep; eating healthy foods; and drinking plenty of water. We also suggest lunchtime walking programs, change of shift aerobic classes, meditation, and 5-minute massages. This may also include implementing caring competencies such as empathy, collaboration, and conflict resolution in the work site. Last, Olender-Russo28 suggests creating forums to share success stories and to communicate evidence-based outcomes such as staff and patient satisfaction, low turnover rates, and patient-related adverse events or avoidances both at the organizational and unit levels to sustain workplace civility and staff motivation.ConclusionRecent reports of the increasing prevalence of incivility and related disruptive behaviors within our nursing academic and clinical settings are alarming, especially when considering the impact on patient and staff safety. The old adage, -it takes a village,- rings true when one considers the complexity of the task of fostering a culture of civility. A comparison study with academic nurse leaders could illuminate shared perceptions or alternative ways to foster civility in nursing education and practice.The model proposed in this study is newly adapted to practice and requires further empirical testing. For example, evidence-based data obtained through institutional assessments, such as the Organizational Civility Scale,29 are needed to measure the organizational culture so that targeted interventions may be implemented and empirically tested. Case study methods may be beneficial to showcase best practices.Researchers also suggest that negative behaviors in the workplace may be a learned process and likely exacerbated within stressful academic and clinical settings.12 Conversely, fostering civility in nursing education and practice may also be a learned process and, as such, amenable to positive interventions. Nurse leaders need to be extremely attentive and supportive toward the success of the nursing practice and nursing education partnership for the cocreation and sustainment of a healthy work environment. Indeed, the promotion of a positive organizational culture has been shown to be a successful strategy and is associated with increased nurse manager engagement in authentic leadership.25 As healthcare providers, we all have an ethical responsibility to care for those who care for others. Specifically, nurse leaders must create and promote a work environment conducive to caring. This includes fostering a culture of civility both within the academy (where nursing learning begins) and within practice environments (where learning of nursing continues).
References

  1. Gallant-Roman M. Strategies and tools to reduce workplace violence. AAOHN J. 2008;56(11):449-455.[Context Link]
  2. Dunhart DT. [Context Link]
  3. Anderson LM, Pearson CM. Tit for tat? The spiraling effect of incivility in the workplace. Acad Manage Rev. 1999;24(3):452-471.[Context Link]
  4. Hutton S, Gates D. Workplace incivility and productivity losses among direct care staff. AAOHN J. 2008;56(4):168-175.[Context Link]
  5. Clark CM. The dance of incivility in nursing education as described by nursing faculty and students. Adv Nurs Sci. 2008;31(4):E37-E54.[Context Link]
  6. Clark CM. Faculty and student assessment and experience with incivility in nursing education: a national perspective. J Nurs Educ. 2008;47(10):458-465.[Context Link]
  7. Luparell S. The effects of student incivility on nursing faculty. J Nurs Educ. 2007;46(1):15-19.[Context Link]
  8. Olender-Russo L. Reversing a bullying culture. RN. 2009;72(8):26-29.[Context Link]
  9. Randle J. Reducing bullying in healthcare organisations. Nurs Stand. 2007;21(22):49-56.[Context Link]
  10. Simons S. Workplace bullying experienced by Massachusetts registered nurses and the relationship to intention to leave the organization. Adv Nurs Sci. 2008;31(2):48-59.[Context Link]
  11. Lipley N. Bullying at work on increase, Royal College of Nursing survey finds. Nurs Manage. 2006;12(10):5.[Context Link]
  12. Lewis MA. Nurse bullying: organizational considerations in the maintenance and perpetration of health care bullying cultures. Nurs Manage. 2006;14(1):52-58.[Context Link]
  13. Boyer EL. [Context Link]
  14. Clark CM, Springer PJ. Incivility in nursing education: descriptive study on definitions and prevalence. J Nurs Educ. 2007;46(1):7-14.[Context Link]
  15. Clark CM, Springer PJ. Thoughts on incivility: student and faculty perceptions of uncivil behavior in nursing education. Nurs Educ Perspect. 2007;28(2):93-97.[Context Link]
  16. Hutchinson M, Vickers M, Jackson D, Wilkes L. Workplace bullying in nursing: towards a more critical organisational perspective. Nurs Inq. 2006;13(2):118-126.[Context Link]
  17. The Joint Commission. Behaviors that undermine a culture of safety. [Context Link]
  18. Bartholomew K. [Context Link]
  19. Vessey JA, DeMarco RF, Gaffney DA, Budin W. Bullying of staff registered nurses in the workplace: a preliminary study for developing personal and organizational strategies for the transformation of hostile to healthy workplace environments. J Prof Nurs. 2009;25(5):299-306.[Context Link]
  20. Cortina LM, Magley VJ, Williams JH, Langout RD. Incivility in the workplace: incidence and impact. J Occup Health Psychol. 2001;6(1):64-80.[Context Link]
  21. Duffield C, O’Brien-Pallas L, Aitken L. Nurses who work outside of nursing. Nurs Health Care Manage Policy. 2004;47:664-667.[Context Link]
  22. Healthgrades, Inc. Healthgrades Seventh Annual Patient Safety in American Hospitals Study. March 2010. Available at [Context Link]
  23. Institute of Medicine. [Context Link]
  24. Institute for Safe Medication Practices. Results from ISMP survey on workplace intimidation. Available at [Context Link]
  25. Shirey MR. Authentic leadership, organizational culture, and healthy work environments. Crit Care Nurs Q. 2009;32(3):189-198.[Context Link]
  26. Griffin M. Teaching cognitive rehearsal as a shield for lateral violence: an intervention for newly licensed nurses. J Contin Educ Nurs. 2004;35(6):257-263.[Context Link]
  27. American Holistic Nurses Association. Holistic stress management for nurses. Available at [Context Link]
  28. Olender-Russo L. creating a culture of regard: an antidote to workplace bullying. Creat Nurs. 2009;15(2):75-81.[Context Link]
  29. Clark CM, Landrum RE. Organizational Civility Scale. Available at [Context Link]

GET THE COMPLETED ASSIGNMENT

ASSIGNMENT COMPLETED AT CapitalEssayWriting.com

MAKE YOUR ORDER AND GET THE COMPLETED ORDER

CLICK HERE TO ORDER THIS PAPER AT CapitalEssayWriting.com ON  Clark Healthy Workplace Inventory to diagnose potential problems with the civility of your organization

NO PLAGIARISM, Get impressive Grades in Your Academic Work

Categories
Writers Solution

service using notional demand and inventory data

Create a semiannual production plan for your new business idea, product, or service using notional demand and inventory data. This initial production plan is based on your market estimates of what you intend to sell and produce. The final paper is managing the project to implement your intended new product/service into the marketplace, but you have to create a production plan that is supported by your market forecasts, and that is the purpose of this assignment.

 Prompt: The plan should replicate the techniques in the text and can be submitted in a basic tabular (spreadsheet) format. It must include the following: 

 Estimates of labor hours consumed 

 Estimated number of worker requirements considering a standard work week, current inventory levels, receipts of new inventory during each month, and varying demand levels for each month of production For service businesses that do not include inventory or raw goods for the assembly line, the inventory of the support materials/equipment or consumable materials can be used. Specifically, the following critical elements must be addressed: 

 Create a semiannual production plan using notional demand and inventory. 

 Estimate the labor hours consumed.

  Estimate the number of worker requirements considering a standard work week, current inventory levels, receipts of new inventory during each month, and varying demand levels for each month of production. 

Rubric Guidelines for Submission: This short paper should adhere to the following formatting requirements: it is submitted as a Word document, 1 to 2 pages (not including title and reference pages), double-spaced, using 12-point Times New Roman font and one-inch margins. All APA citations should reference the course text and at least two additional resources.

GET THE COMPLETED ASSIGNMENT

ASSIGNMENT COMPLETED AT CapitalEssayWriting.com

MAKE YOUR ORDER AND GET THE COMPLETED ORDER

CLICK HERE TO ORDER THIS PAPER AT CapitalEssayWriting.com ON service using notional demand and inventory data

NO PLAGIARISM, Get impressive Grades in Your Academic Work

Categories
Writers Solution

Unregister a Virtual Machine from the vCenter Server Appliance Inventory

Working with Virutal Machines
LAB 7
WEEK – 6
CONTENTS

  1. Unregister a Virtual Machine from the vCenter Server Appliance Inventory
  2. Register a Virtual Machine in the vCenter Server Appliance Inventory
  3. Unregister and Delete a Virtual Machine from the Disk
  4. Take Snapshots of a Virtual Machine
  5. Revert to a Snapshot
  6. Delete an Individual Snapshot
  7. Use the Delete All Function in the Snapshot Manager
    Week 6 Manage virtual machines (Template, clones and snapshot)
    Objective: Perform virtual machine management tasks
    In this lab, you will perform the following tasks:
  8. Unregister a Virtual Machine from the vCenter Server Appliance Inventory
  9. Register a Virtual Machine in the vCenter Server Appliance Inventory
  10. Unregister and Delete a Virtual Machine from the Disk
  11. Take Snapshots of a Virtual Machine
  12. Revert to a Snapshot
  13. Delete an Individual Snapshot
  14. Use the Delete All Function in the Snapshot Manager
    Task 1: Unregister a Virtual Machine from the vCenter Server Appliance Inventory
    You unregister a virtual machine from the VMware vCenter Server™ Appliance™ inventory. Unregistering does not delete the virtual machine from the datastore.
    Students should perform the steps in this task individually.
    • vCenter Server Appliance name
    • vCenter Single Sign-On user name
    • vCenter Single Sign-On password
  15. If VMware vSphere® Web Client is not active, open a Web browser and connect to the vCenter Server Appliance home page at https://vCenter_Server_Appliance/vsphere-client and log in.
  16. On the vSphere Web Client Home page, click VMs and Templates and expand the view of the inventory.
  17. Select the your_name##-4 virtual machine and click the Summary tab.
  18. View the Related Object pane and record the VMware vSphere® VMFS datastore name where the your_name##-4 virtual machine resides. __
  19. Right-click the your_name##-4 virtual machine and select Power Shut Down Guest OS.
  20. Click Yes to confirm the shutdown.
  21. After the your_name##-4 virtual machine is shut down, right-click it and select Remove from Inventory.
    CAUTION
    Do not select Delete from Disk. This operation is not recoverable.
  22. Click Yes to confirm the removal.
  23. Click the Refresh icon in vSphere Web Client.
  24. Verify that the your_name##-4 virtual machine no longer appears in the inventory.
  25. In the Navigator pane, click the Storage tab and expand the view.
  26. Right-click the your_name##-4 virtual machine’s VMFS datastore and select Browse Files.
    You recorded the VMFS datastore name in step 4.
  27. View the folders.
    Does a folder named your_name##-4 exist?
    Task 2: Register a Virtual Machine
    If you removed a virtual machine from the vCenter Server Appliance inventory but did not remove it from the managed host’s datastore, you can return it to the inventory by registering it with the vCenter Server Appliance.
    Students should perform the steps in this task individually.
  28. In the list of virtual machine files in the right pane, right-click the yourname##-4.vmx file and select Register VM.
    The screenshot shows an example selecting of Register VM.
    The Register Virtual Machine wizard starts.
  29. 2. On the Name and Location page, enter your_name##-5.

is the number of your ESXi host.

  1. In the Select inventory location pane, select the LabVMs folder and click Next.
  2. On the Host/Cluster page, select your ESXi host and click Next.
  3. On the Ready to Complete page, review the information and click Finish.
  4. In the Navigator pane, click the VMs and Templates tab and verify that the your_name##-5 virtual machine is in the LabVMs folder.
    Task 3: Unregister and Delete a Virtual Machine from the Disk
    You can remove a virtual machine from the vCenter Server Appliance inventory and delete allassociated virtual machine files from the datastore, including the configuration file and the virtual disk files.
    Students should perform the steps in this task individually.
  5. On the vSphere Web Client Home page, click VMs and Templates and expand the view of the inventory.
  6. Select the your_name##-5 virtual machine and click the Summary tab.
  7. View the Related Object pane and record the VMFS datastore name on which the your_name##-5 virtual machine resides. __
  8. Right-click the your_name##-5 virtual machine, select Delete from Disk, and click Yes to confirm the deletion.
  9. Verify that the your_name##-5 virtual machine no longer appears in the inventory.
  10. In the Navigator pane, click the Storage tab and expand the inventory view.
  11. Right-click the VMFS datastore name and select Browse Files.
    You recorded the VMFS datastore name in step 3.
  12. Verify that the folder and files from which the your_name##-5 virtual machine was registered no longer exist.
    The folder has the original virtual machine name: your_name##-4.
    Task 4: Take Snapshots of a Virtual Machine
    You take a snapshot to preserve the state and the data of a virtual machine at the time the snapshot is taken. You use snapshots when you must revert repeatedly to the same virtual machine state but do not want to create multiple virtual machines.
    Students perform the steps in this task individually.
    • Virtual machine administrator password
    • Software ISO image location
  13. On the vSphere Web Client Home page, click VMs and Templates and expand the view of the inventory.
  14. In the left pane, select the your_name##-3 virtual machine.
  15. In the center pane, click Launch Remote Console on the Summary tab.
  16. If necessary, log in as the virtual machine administrator and enter the password.
  17. On the task bar, click Start and select Run.
  18. In the Open text box, enter C: and click OK.
  19. Resize the window as needed so that the files in C: and the Recycle Bin are visible.
  20. Create a text file on Desktop iometer.
  21. Drag the iometer file to the Recycle Bin.
  22. To completely remove the iometer file, right-click the Recycle Bin icon and select Empty Recycle Bin.
  23. Click Yes to confirm the file deletion and leave the virtual machine console open.
  24. In the vSphere Web Client, right-click the your_name##-3 virtual machine and select Snapshots Take Snapshot.
    The Take VM Snapshot wizard starts.
  25. Configure the snapshot.
  26. Click OK and monitor the task in the Recent Tasks pane.
  27. Create a text file on Desktop cpu-busy.
  28. Return to the virtual machine console and drag the cpu-busy file to the Recycle Bin.
  29. To completely remove the cpu-busy file, right-click the Recycle Bin icon and select Empty Recycle Bin.
  30. Click Yes to confirm the file deletion and leave the virtual machine console open.
  31. Return to the vSphere Web Client.
  32. In the inventory pane, right-click the your_name##-3 virtual machine and select Snapshots Take Snapshot take another snapshot.
  33. Click OK and monitor the task in the Recent Tasks pane.
  34. Connect the ClassFiles-vSphere.iso file on the CD/DVD drive to the your_name##-3 virtual machine.
    a. Right-click the your_name##-3 virtual machine and select Edit Settings.
    b. On the Virtual Hardware tab, select Datastore ISO File from the CD/DVD drive 1 dropdown menu.
    c. Select the Classfiles-vSphere.iso file and click OK.
    d. Select the Connected check box.
    e. Click OK to close the Edit Settings dialog box.
  35. Return to the your_name##-3 virtual machine console.
  36. If the D: drive does not open automatically, open Windows Explorer and go to the D: drive.
  37. Copy the cpubusy file from the D: drive to the virtual machine’s desktop.
  38. Disconnect the CD/DVD drive from your_name##-3 virtual machine.
    a. From the vSphere Web Client, right-click the your_name##-3 virtual machine and select Edit Settings.
    b. On the Virtual Hardware tab, click the arrow next to CD/DVD drive 1 to expand the view.
    c. Select Client Device from the drop-down menu and click OK.
  39. Right-click the your_name##-3 virtual machine and take another snapshot by select Snapshots Take Snapshot to take another snapshot.
  40. Configure the Snapshot.
  41. Click OK.
  42. Monitor the task in the Recent Tasks pane and wait for completion.
  43. Right-click the your_name##-3 virtual machine and select Snapshots Manage Snapshots. You should see three snapshots. The difference in icons is due to whether the Snapshot the virtual machine’s memory check box was selected when the snapshot was taken.
  44. Leave the Snapshot Manager open.
  45. Close the your_name##-3 virtual machine console.
    Task 5: Revert to a Snapshot
    You can return a virtual machine to the state it had at the time the selected snapshot was taken.
    Students perform the steps in this task individually.
    • Virtual machine administrator password
  46. Verify that the your_name##-3 virtual machine is powered on.
  47. In the Snapshot Manager, select the Without iometer or cpu-busy snapshot and click Revert to.
  48. Click Yes to confirm the reversion.
  49. Click Close to close the Snapshot Manager.
    Q1. Did the virtual machine power off, and what is the reason?
  50. Right-click the your_name##-3 virtual machine in the inventory and select Power Power On.
  51. Launch a remote console to the your_name##-3 virtual machine and wait for the boot process to finish.
  52. If necessary, log in as the administrator with the password.
    Q2. Is either iometer or cpu-busy on the local disk (C:)?
  53. Close the your_name##-3 virtual machine console.
  54. In the vSphere Web Client, right-click the your_name##-3 virtual machine and select Snapshots Manage Snapshots.
    The You Are Here pointer should be below the snapshot named Without iometer or cpu-busy.
  55. In the Snapshot Manager, select the With cpu-busy snapshot and click Revert to.
  56. Click Yes to confirm the reversion.
  57. Click Close to close the Snapshot Manager.
    Q3. Did the virtual machine power off, and what is the reason?
  58. Open a remote console for the your_name##-3 virtual machine.
    Q4. Is cpu-busy on the desktop?
    Q5. Is iometer on the desktop?
  59. Minimize the your_name##-3 virtual machine console.
    Task 6: Delete an Individual Snapshot
    You can use the Delete All function to commit all the intermediate snapshots before the current state.
    Students perform the steps in this task individually.
  60. Right-click the your_name##-3 virtual machine and select Snapshots Manage Snapshots. The You Are Here pointer should be below the snapshot named With cpu-busy.
  61. In the Snapshot Manager, select the Without iometer or cpu-busy snapshot and click Delete.
  62. Click Yes to confirm the deletion.
  63. Click Close to close the Snapshot Manager.
    Q1. Did the virtual machine power off?
    Q2. Is cpu-busy on the desktop?
    Task 7: Use the Delete All Function in the Snapshot Manager
    You can remove a snapshot from the Snapshot Manager. The snapshot files are consolidated and written to the parent snapshot disk.
    Students perform the steps in this task individually.
  64. In the vSphere Web Client, right-click the your_name##-3 virtual machine and select Snapshots Manage Snapshots.
  65. Click Delete All and click Yes to confirm that you want to delete all the remaining snapshots. The You Are Here pointer should be below the your_name##-3 virtual machine.
    Q1. Were all the remaining snapshots deleted from the Snapshot Manager?
  66. Click Close to close the Snapshot Manager.
  67. Return to the your_name##-3 virtual machine console.
    Q2. Is cpu-busy on the desktop, and why?
  68. Close the your_name##-3 virtual machine console.
  69. Leave the vSphere Web Client open for the next lab

GET SOLUTION BELOW

CLICK HERE TO MAKE YOUR ORDER

TO BE RE-WRITTEN FROM THE SCRATCH

NO PLAGIARISM

  • Original and non-plagiarized custom papers. Our writers develop their writing from scratch unless you request them to rewrite, edit or proofread your paper.
  • Timely Delivery. capitalessaywriting.com believes in beating the deadlines that our customers have imposed because we understand how important it is.
  • Customer satisfaction. Customer satisfaction. We have an outstanding customer care team that is always ready and willing to listen to you, collect your instructions and make sure that your custom writing needs are satisfied
  • Privacy and safety. It’s secure to place an order at capitalessaywriting.com We won’t reveal your private information to anyone else.
  • Writing services provided by experts. Looking for expert essay writers, thesis and dissertation writers, personal statement writers, or writers to provide any other kind of custom writing service?
  • Enjoy our bonus services. You can make a free inquiry before placing and your order and paying this way, you know just how much you will pay. A verdict was rendered against three parent chaperones. How was the third parent included in the case?
  • Premium papers. We provide the highest quality papers in the writing industry. Our company only employs specialized professional writers who take pride in satisfying the needs of our huge client base by offering them premium writing services Unregister a Virtual Machine from the vCenter Server Appliance Inventory

Get Professionally Written Papers From The Writing Experts 

Green Order Now Button PNG Image | Transparent PNG Free Download on SeekPNG Our Zero Plagiarism Policy | New Essays
Categories
Writers Solution

inventory of Condiments and Toppings at the Valley View facility

Excel_2G_Condiments_Inventory

Project Description:

#In the following project, you will edit a worksheet that summarizes the inventory of Condiments and Toppings at the Valley View facility 

#Open   the Excel workbook Student_Excel_2G_Condiments_Inventory.xlsx   downloaded with   this project.

#Change the Theme to Ion. Rename   Sheet1 as Condiments and Sheet2 as Toppings. Click the Condiments sheet tab   to make it the active sheet.
 

  #If the theme is not available, click Browse for Themes, navigate to the files   you downloaded with this project, and then select Ion.thmx.

#To the right of column B, insert   two new columns to create new blank columns C and D. By using Flash Fill in   the two new columns, split the data in column B into a column for Item # in   column C and Category in column D. Type Item # as the column title in column C and Category as the column title in column   D. Delete column B. Cut column C, Category,   and paste it to column G. Delete the empty column C.  

#Display the Toppings worksheet,   and then repeat Step 3 on this worksheet.

#Without grouping the sheets,   make the following calculations in both worksheets:
  • In cell B4, enter a function to sum the Quantity in Stock data, and then   apply Comma Style with zero decimal places to the result.
  • In cells B5:B8, enter formulas to calculate the Average, Median, Lowest,   and Highest retail prices, and then apply the Accounting Number Format.

#Without grouping the sheets,   make the following calculations in both worksheets:
  • In cell B10, enter a COUNTIF function to determine how many different types   of Relish are in stock on the Condiments   sheet and how many different types of Salsa are in stock on the Toppings worksheet.

 

#Without grouping the sheets,   make the following calculations in both worksheets:
  • In cell G14 type Stock Level.
  • In cell G15, enter an IF function to determine the items that must be   ordered. If the Quantity in Stock is less than 75, the Value_if_true is Order. Otherwise, the Value_if_false is OK. Fill the formula down through   all the rows.

#Without grouping the sheets,   apply the following formatting in both worksheets:
  • Apply Conditional Formatting to the Stock Level column so that Text that   Contains the text Order are formatted with Bold Italic, a Font Color using in the fifth   column, the first color, and a Fill color set to No Color. Apply Gradient   Fill Red Data Bars to the Quantity in Stock column.

 

#In the Condiments sheet, format   the range A14:G42 as a table with headers and apply Sky Blue, Table Style   Light 20. If the table style is not available, choose a similar style. Insert   a Total Row, filter by Category for Relish, and then Sum the Quantity in   Stock column. Record the result in cell B11.

#Clear the filter from the table.   Sort the table on the Item # column from Smallest to Largest, and then remove   the Total Row. On the Page Layout tab, set Print Titles so that row 14   repeats at the top of each page.

In the Toppings sheet, format   the range A14:G42 as a table with headers and apply Light Green, Table Style   Light 19. If the table style is not available, choose a similar style. Insert   a Total Row, filter by Category for Salsa, and then Sum the Quantity in Stock   column. Record the result in cell B11.

#Clear the filter from the table.   Sort the table on the Item # column from Smallest to Largest, and then remove   the Total Row. On the Page Layout tab, set Print Titles so that row 14   repeats at the top of each page, and then save your workbook.

#Group the two worksheets. Merge   and center the title in cell A1 across the range A1:G1 and apply the Title   cell style. Merge and center the subtitle in cell A2 across the range A2:G2   and apply the Heading 1 cell style. AutoFit Columns A:G. Center the   worksheets Horizontally, and then change the Orientation to Landscape.

#Save your workbook and then   ungroup the sheets. Click the Toppings sheet tab, and then insert a new   worksheet. Change the sheet name to Summary and then widen columns A:D to 170 pixels.   Move the Summary sheet so that it is the first sheet in the workbook.

#In cell A1, type Valley View   Inventory Summary.   Merge & Center the title across the range A1:D1, and then apply the Title   cell style. In cell A2, type As of June 30 and then Merge & Center the text across the   range A2:D2. Apply the Heading 1 cell style.

#On the Condiments sheet, copy   the range A4:A8. Display the Summary sheet and Paste the selection to cell   A5. Apply the Heading 4 cell style to the selection.

#In the Summary sheet, in cell   B4, type Condiments. In cell C4, type Toppings. In cell D4, type Condiments/Toppings. Center the column titles, and   then apply the Heading 3 cell style.

#In cell B5, enter a formula that   references cell B4 in the Condiments sheet so that the Condiments Total Items   in Stock displays in B5. Create similar formulas to enter the Average Price,   Median Price, Lowest Price, and Highest Price from the Condiments sheet into   the Summary sheet in the range B6:B9.

#Enter formulas in the range   C5:C9 that reference the Total Items in Stock and the Average Price, Median   Price, Lowest Price, and Highest Price cells in the Toppings worksheet.

#In the range D5:D9 of the   Summary sheet, insert Column sparklines using the values in the Condiments   and Toppings columns (insert in each cell individually). Format the   sparklines using the first five styles in the first row in their given order.   To apply the Sparkline style, on the Design tab, in the Style group, click   More, and apply the first five styles in the first row.

 

#To the range B5:C5, apply Comma   Style with zero decimal places, and confirm that the Accounting Number Format   is applied to the range B6:C9. Center the Summary worksheet Horizontally and   change the Orientation to Landscape. Insert a custom footer in the left   section with the file name

  • GET SOLUTION FOR THIS ASSIGNMENT

    CLICK HERE TO MAKE YOUR ORDER

    TO BE RE-WRITTEN FROM THE SCRATCH

    NO PLAGIARISM

    • Original and non-plagiarized custom papers. Our writers develop their writing from scratch unless you request them to rewrite, edit or proofread your paper.
    • Timely Delivery. capitalessaywriting.com believes in beating the deadlines that our customers have imposed because we understand how important it is.
    • Customer satisfaction. Customer satisfaction. We have an outstanding customer care team that is always ready and willing to listen to you, collect your instructions and make sure that your custom writing needs are satisfied
    • Privacy and safety. It’s secure to place an order at capitalessaywriting.com We won’t reveal your private information to anyone else.
    • Writing services provided by experts. Looking for expert essay writers, thesis and dissertation writers, personal statement writers, or writers to provide any other kind of custom writing service?
    • Enjoy our bonus services. You can make a free inquiry before placing and your order and paying this way, you know just how much you will pay. inventory of Condiments and Toppings at the Valley View facility
    • Premium papers. We provide the highest quality papers in the writing industry. Our company only employs specialized professional writers who take pride in satisfying the needs of our huge client base by offering them premium writing services.

    Get Professionally Written Papers From The Writing Experts 

    Green Order Now Button PNG Image | Transparent PNG Free Download on SeekPNG Our Zero Plagiarism Policy | New Essays
Categories
Writers Solution

Cost Analysis When materials are stored in inventory for a period of time before being used in the production process

1. Discussion Board – Cost Analysis When materials are stored in inventory for a period of time before being used in the production process, the accounting cost and economic cost differ if the market price of these materials have changed from the original purchase price. Accounting cost is equal to the actual acquisition cost and economic cost is equal to the current replacement cost. After reading the articles “U.S. Car Business in Major Shift” and “Car Making in America”, which cost do you feel the U.S. Car industry (GM, Ford, etc.) is most affected by – accounting or economic cost? Submission Details:

  • Initial post for each question must be between 250-300 words in length, and each peer reply per question must be between 150-200 words in length.

2. An oligopoly is characterized by a relatively small number of firms offering a similar product or service. Oligopoly products may be branded, as in soft drinks, cereals, and athletic shoes, or unbranded, as in crude oil, aluminum, and cement. The main distinction of oligopoly is that the number of firms is small enough that actions by any individual firm on price, output, product style, quality, introduction of new models, and terms of sale has an impact on the sales of other firms in the industry. Review the Table 12.1 (pg. 416), select a dominant single firm, duopoly firm, and triopoly firm and discuss if you foresee any weaknesses in the three firms you selected that would allow entrance into this market or if one of the firm has enough strength to become a monopoly? Submission Details: 

  • Initial post for each question must be between 250-300 words in length, and each peer reply per question must be between 150-200 words in length

GET SOLUTION FOR THIS ASSIGNMENT

CLICK HERE TO MAKE YOUR ORDER

TO BE RE-WRITTEN FROM THE SCRATCH

NO PLAGIARISM

  • Original and non-plagiarized custom papers. Our writers develop their writing from scratch unless you request them to rewrite, edit or proofread your paper.
  • Timely Delivery. capitalessaywriting.com believes in beating the deadlines that our customers have imposed because we understand how important it is.
  • Customer satisfaction. Customer satisfaction. We have an outstanding customer care team that is always ready and willing to listen to you, collect your instructions and make sure that your custom writing needs are satisfied
  • Privacy and safety. It’s secure to place an order at capitalessaywriting.com We won’t reveal your private information to anyone else.
  • Writing services provided by experts. Looking for expert essay writers, thesis and dissertation writers, personal statement writers, or writers to provide any other kind of custom writing service?  film dealing with the march on Washington on August 28, 1963
  • Enjoy our bonus services. You can make a free inquiry before placing and your order and paying this way, you know just how much you will pay. stored in inventory for a period of time before being used in the production process
  • Premium papers. We provide the highest quality papers in the writing industry. Our company only employs specialized professional writers who take pride in satisfying the needs of our huge client base by offering them premium writing services.

Get Professionally Written Papers From The Writing Experts 

Green Order Now Button PNG Image | Transparent PNG Free Download on SeekPNG Our Zero Plagiarism Policy | New Essays
Categories
Writers Solution

Cost Analysis When materials are stored in inventory for a period of time before being used in the production process

1. Discussion Board – Cost Analysis When materials are stored in inventory for a period of time before being used in the production process, the accounting cost and economic cost differ if the market price of these materials have changed from the original purchase price. Accounting cost is equal to the actual acquisition cost and economic cost is equal to the current replacement cost. After reading the articles “U.S. Car Business in Major Shift” and “Car Making in America”, which cost do you feel the U.S. Car industry (GM, Ford, etc.) is most affected by – accounting or economic cost? Submission Details:

  • Initial post for each question must be between 250-300 words in length, and each peer reply per question must be between 150-200 words in length.

2. An oligopoly is characterized by a relatively small number of firms offering a similar product or service. Oligopoly products may be branded, as in soft drinks, cereals, and athletic shoes, or unbranded, as in crude oil, aluminum, and cement. The main distinction of oligopoly is that the number of firms is small enough that actions by any individual firm on price, output, product style, quality, introduction of new models, and terms of sale has an impact on the sales of other firms in the industry. Review the Table 12.1 (pg. 416), select a dominant single firm, duopoly firm, and triopoly firm and discuss if you foresee any weaknesses in the three firms you selected that would allow entrance into this market or if one of the firm has enough strength to become a monopoly? Submission Details: 

  • Initial post for each question must be between 250-300 words in length, and each peer reply per question must be between 150-200 words in length.

GET SOLUTION FOR THIS ASSIGNMENT

CLICK HERE TO MAKE YOUR ORDER

TO BE RE-WRITTEN FROM THE SCRATCH

NO PLAGIARISM

  • Original and non-plagiarized custom papers. Our writers develop their writing from scratch unless you request them to rewrite, edit or proofread your paper.
  • Timely Delivery. capitalessaywriting.com believes in beating the deadlines that our customers have imposed because we understand how important it is.
  • Customer satisfaction. Customer satisfaction. We have an outstanding customer care team that is always ready and willing to listen to you, collect your instructions and make sure that your custom writing needs are satisfied
  • Privacy and safety. It’s secure to place an order at capitalessaywriting.com We won’t reveal your private information to anyone else.
  • Writing services provided by experts. Looking for expert essay writers, thesis and dissertation writers, personal statement writers, or writers to provide any other kind of custom writing service?  film dealing with the march on Washington on August 28, 1963
  • Enjoy our bonus services. You can make a free inquiry before placing and your order and paying this way, you know just how much you will pay.
  • Premium papers. We provide the highest quality papers in the writing industry. Our company only employs specialized professional writers who take pride in satisfying the needs of our huge client base by offering them premium writing services.

Get Professionally Written Papers From The Writing Experts 

Green Order Now Button PNG Image | Transparent PNG Free Download on SeekPNG