Categories
Writers Solution

Identification and Justifications of parameters used in the sensitivity analysis.

Assessment 3: Project Report – Part B
Due date: Week 12
Group/individual: Group
Word count/Time provided: 2000 words
Weighting: 15%
Unit Learning Outcomes: ULO1, ULO3, ULO4, ULO5
Assessment 3 Detail
This assessment is a staged submissions assessment, and it should be conducted in two parts. The second part of assessment 2 should be conducted in continuation of Assessment 2(Part A).
Project Report – Part B Details :
At the end of assessment 2(Part A) students should have decided on the base scenario. In this assessment, students should continue the project development and optimise their case report by conducting a sensitive analysis, Identification stakeholders and their needs, understanding due diligence process. It is important that sustainability be considered during project development and optimisation process.
For sensitivity analyses, parameters should be selected, and scenarios of sensitivity analyses should be defined accordingly. For each scenario, the economic analysis should be carried out, and results should be compared and explained.
The students should also identify stakeholders, gather the information needed for stakeholders and supporters of the project by considering due diligence process.
As a project manager, your recommendations on the project are critical. In your report assessing of the project, the report should address brief on the importance of sustainability and how the stakeholders of this project to be engaged.
Guidelines for writing project report Part B:
1) Identification and Justifications of parameters used in the sensitivity analysis.
2) Conduct a sensitivity analysis with respect to interest rate and economic analysis.
3) Identify Stakeholders and prepare a Stakeholder register.
4) Consider due diligence process and provide stakeholders engagement plan.
5) Consider project management and optimisation with focus on sustainability.
6) Conclusions, findings, reasons for recommendation.
Assessments 3 (Project Report – Part B) Marking Criteria and Rubric
The assessment will be marked out of 100 and will be weighted 15% of the total unit mark. The marking criteria and rubric are shown on the following page.
Assessment 3 (Project Report – Part B) Marking Criteria and Rubric
Marking Criteria Not Satisfactory (0-49% of the criterion mark) Satisfactory
(50-64% of the criterion mark) Good
(65-74% of the criterion mark) Very Good
(75-84% of the criterion mark) Excellent
(85-100% of the criterion mark)
Identification and Justifications of parameters used in the sensitivity analysis (15 marks) Inadequate Identification and Justifications of parameters used in the sensitivity analysis.
Basic Identification and Justifications of parameters used in the sensitivity analysis Exhibits a factual and/or conceptual skills for
Identification and
Justifications of parameters used in the sensitivity analysis Exhibits accurate & detailed
breadth & depth
Identification and for Justifications of parameters used in the sensitivity analysis Displays Excellent
Identification and
Justifications of parameters used in the sensitivity analysis.
Conducting a sensitivity analysis and economic analysis (15 marks) Inadequate sensitivity analysis and economic
analysis
Basic sensitivity analysis and
economic analysis
Exhibits a factual and/or conceptual skills in sensitivity analysis and economic analysis Exhibits accurate & detailed breadth & depth in sensitivity analysis and economic analysis Displays Excellent sensitivity analysis and economic analysis.
Identification of Stakeholders, considering due diligence process and providing stakeholders engagement plan (20 marks) Inadequate Identification of Stakeholders, considering due diligence process and providing stakeholders engagement plan Basic Identification of Stakeholders, considering due diligence process and providing stakeholders engagement plan Exhibits a factual and/or conceptual skills in
Identification of
Stakeholders, considering due diligence process and providing stakeholders engagement plan Exhibits accurate & detailed
breadth & depth in
Identification of
Stakeholders, considering due diligence process and providing stakeholders engagement plan Displays Excellent
Identification of
Stakeholders, considering due diligence process and providing stakeholders engagement plan
Considering project management and optimisation with focus on
sustainability (15 marks) Inadequate Considering project management and optimisation with focus on sustainability.
Basic Considering project management and optimisation with focus on sustainability Exhibits a factual and/or conceptual skills in Considering project management and optimisation with focus on sustainability Exhibits accurate & detailed
breadth & depth in Considering project management and optimisation with focus on sustainability Displays Excellent Considering project
management and optimisation with focus on sustainability.
Conclusions and recommendations. (5 marks) Inadequate Conclusions and
recommendations
Displays Basic Conclusions and recommendations Exhibits a factual and/or conceptual skills of Conclusions and recommendations.
Exhibits accurate and Detailed breadth and depth in Conclusions and
recommendations
Displays Excellent Conclusions and recommendations
Writing and Presentation (20 marks)
– Evidence of good academic writing; – Free of any grammatical errors; using correct sentence structure; applying an extensive range of vocabulary; – Proper introduction and conclusion. Consistent formatting with suitable headings and sub-headings – Consistent use of labels, highlights, font weight and underline, Reference list
Referencing using HARVARD guidelines Inadequate Writing and
Presentation skills
Basic
Writing and Presentation skills
Exhibits a factual and/or conceptual skills of Writing
and Presentation skills
Exhibits accurate and Detailed breadth and depth in Writing and
Presentation skills
Displays Excellent Writing and Presentation skills

GET SOLUTION FOR THIS ASSIGNMENT, Get Impressive Scores in Your Class

CLICK HERE TO MAKE YOUR ORDER

TO BE RE-WRITTEN FROM THE SCRATCH

GET SOLUTION FOR THIS ASSIGNMENT

CLICK HERE TO MAKE YOUR ORDER

TO BE RE-WRITTEN FROM THE SCRATCH

NO PLAGIARISM

  • Original and non-plagiarized custom papers- Our writers develop their writing from scratch unless you request them to rewrite, edit or proofread your paper.
  • Timely Deliveryprimewritersbay.com believes in beating the deadlines that our customers have imposed because we understand how important it is.
  • Customer satisfaction- Customer satisfaction. We have an outstanding customer care team that is always ready and willing to listen to you, collect your instructions and make sure that your custom writing needs are satisfied
  • Confidential- It’s secure to place an order at primewritersbay.com We won’t reveal your private information to anyone else.
  • Writing services provided by experts- Looking for expert essay writers, thesis and dissertation writers, personal statement writers, or writers to provide any other kind of custom writing service?
  • Enjoy Please Note-You have come to the most reliable academic writing site that will sort all assignments that that you could be having. We write essays, research papers, term papers, research proposals. Identification and Justifications of parameters used in the sensitivity analysis.

Get Professionally Written Papers From The Writing Experts 

Green Order Now Button PNG Image | Transparent PNG Free Download on SeekPNG Our Zero Plagiarism Policy | New Essays
Categories
Writers Solution

Identify the type of data and measurement scale for each with relevant justifications.

Statistics for Business Decisions
Assessment Weight: 50 total marks
Instructions:
All questions must be answered by using the answer boxes provided in this paper.
Completed answers must be submitted to Blackboard by the published due date and time.
Submission instructions are at the end of this paper.
Purpose:
This assessment consists of six (6) questions and is designed to assess your level of knowledge of the key topics covered in this unit

Question 1 ( 7 marks)
Holmes institute Students evaluation of the course they follow, askes following questions from students. Identify the type of data and measurement scale for each with relevant justifications.
How many interactive tutorials did you attend in this semester?
What was your group assignment grade (HD, D, C, P, F)?
Rate the lecturer (very effective, effective, not too effective and not at all effective)
Which campus you are registered in (Melbourne, Sydney, Brisbane or Gold coast)
(2 marks)
ANSWER: ** Answer box will enlarge as you type
An investor recorded the following annual returns of one of his investments. You are required to calculate and comment on;
Mean return.
Variance and standard deviation of the return.
Geometric return.
Year 2016 2017 2018 2019 2020
Return 15% 17% 19% 10% -5%
(5 marks)
ANSWER: ** Answer box will enlarge as you type
Question 2 (11 marks)
Nature lovers’ association of Australia, launched a campaign to encourage paper less communication and/or recycling of used papers to save the trees to reduce global warming. Hence, many small businesses have scaled up their business such as new forms of online document exchanges and collecting used papers and cardboards from households and companies.
Abita Recycling Ltd is one such company which is operates in Melbourne. The financial analysist of the company has estimated that the firm would make a profit if the mean weekly collection of papers and cardboards from each household exceeded 1KG. To examine the feasibility of a recycling plant, a random sample of 100 households was selected and sample mean and standard deviations are 1.1KG and 0.35KG respectively.
Following the 6-step process of hypothesis testing, you are required to examine do this information provide sufficient evidence at 99% confidence to allow the analyst to conclude that a recycling plant would be profitable?
ANSWER:
Question 3 (11 marks)
Edex limited is a renowned agricultural chemical manufacturer in Australia. They conduct many research and development in the field of Agri and Horticulture. Company wanted to examine the effect of temperature on farming of their selected range of products.
Company has produced following results based on their data gathering.
15° C 35 24 36 39 32
25° C 30 31 34 23 27
35° C 23 28 28 30 31
You are required to answer following questions;
State the null and alternative hypothesis for single factor ANOVA to test for any significant difference in the perception among three groups. (1 marks)
ANSWER:
State the decision rule at 5% significance level. (2 marks)
ANSWER:
Calculate the test statistic. (6 marks)
ANSWER:
Based on the calculated test statistics, decide whether there are any significant differences between the yield based on the given temperature levels. (2 marks)
ANSWER:
Note: No excel ANOVA output allowed in question3. Students need to show all the steps in calculations.
Question 4 (7 marks)
Melbourne Uni Lodge has decided to provide cup of cold or hot drinks for their tenants to attract them after the Covid pandemic. They have determined that mean number of cups of drinks per day is 2.00 with the standard deviation of 0.6. There will be 125 new tenants in the upcoming months.
What is the probability that the new tenants will consume more than 240 cups of drinks per day?
ANSWER:
Question 5 (7 marks)
Yummy Lunch Restaurant needs to decide the most profitable location for their business expansion. Marketing manager plans to use a multiple regression model to achieve their target. His model considers yearly revenue as the dependent variable. He found that number of people within 2KM (People), Mean household income(income), no of competitors and price as explanatory variables of company yearly revenue.
The following is the descriptive statistics and regression output from Excel.
Revenue People Income Competitors Price
Mean 343965.68 5970.26 41522.96 2.8 5.68
Standard Error 5307.89863 139.0845281 582.1376385 0.142857 0.051030203
Median 345166.5 6032 41339.5 3 5.75
Mode #N/A 5917 #N/A 3 6
Standard Deviation 37532.51115 983.47613 4116.334718 1.010153 0.360838027
Sample Variance 1408689393 967225.2984 16944211.51 1.020408 0.130204082
Sum 17198284 298513 2076148 140 284
Count 50 50 50 50 50
SUMMARY OUTPUT
Regression Statistics
Multiple R 0.77
R Square A
Adjusted R Square B
Standard Error 25139.79
Observations 50.00
ANOVA
df SS MS F Significance F
Regression C 40585376295 F H 3.0831E-08
Residual D 28440403984 G
Total E 69025780279
Coefficients Standard Error t Stat P-value
Intercept -68363.1524 78524.7251 -0.8706 0.3886
People 6.4394 3.7051 I 0.0891
Income 7.2723 0.9358 J 0.0000
Competitors -6709.4320 3818.5426 K 0.0857
Price 15968.7648 10219.0263 L 0.1251
You are required to;
Complete the missing entries from A to L in this output (2 marks)
ANSWER:
Derive the regression model (1 mark)
ANSWER:
What does the standard error of estimate tell you about the model? (1 mark)
ANSWER:
Assess the independent variables significance at 5% level (develop hypothesis if necessary in the analysis)? (3 marks)
ANSWER:
Question 6 (7 marks)
Anita Limited has shared their annual sales revenue over the last 6 financial years from 2015 to 2020.
Year Sales ($ 000)
2015 4500
2016 5100
2017 4900
2018 5400
2019 5670
2020 6000
You are required to;
Using linear trend equation forecast the sales revenue of Anita Limited for 2021. (5 marks)
ANSWER:
Calculate the forecasted sales difference if you use 3-period weighted moving average designed with the following weights: 2018 (0.1), 2019 (0.3) and 2020(0.6). (2 marks)
ANSWER:
Note: See the formula sheet on the next page.
FORMULA SHEET
K = 1 + 3.3 log10 n
Summary Measures (n – sample size; N – Population size)
µ= (?(i=1)^N¦X_i )/N X ¯= (?(i=1)^n¦X_i )/n p ^= X/n
s^2= 1/(n-1) ?(i=1)^n¦(x_i-x ¯ )^2 Or s^2= 1/(n-1) [(?(i=1)^n¦x_i^2 )-nx ¯^2 ]
Or s^2= 1/(n-1) [(?(i=1)^n¦x_i^2 )-(?(i=1)^n¦x_i )^2/n]
s^2= 1/N ?(i=1)^N¦(x_i-µ)^2 Or s^2= 1/N [(?(i=1)^N¦x_i^2 )-nµ^2 ]
s~Range/4 CV=s/µ cv=s/x ¯
Location of the pth percentile:
L_(p= p/100(n+1))
IQR = Q3 – Q1
Expected value of a discrete random variable
E(x)=µ=?¦?x*f(x)?
Variance of a discrete random variable
Var(x)=?¦(x-µ)^2 f(x)
Z and t formulas:
Z=(x-µ)/s Z=(x ¯-µ)/(s/vn) Z=(p ^-p)/v(pq/n) t=(x ¯-µ)/(s/vn)
Confidence intervals
Mean:
x ¯±t_(a/2) s/vn
Proportion:
p ^ ± z_(a/2) v((p ^ q ^)/n)
n= (z_(a/2)^2 p q)/B^2
Time Series Regression
b_1= (?(t=1)^n¦[(t- ¯t)(y_t- ¯y)] )/(?(t=1)^n¦(t- ¯t)^2 )
b_0= ¯Y- b_1 ¯t
T_t= b_0+ b_1 t
ANOVA:
SSE= ?(j=1)^k¦?(n_j-1) ?s_j?^2 ? Simple Linear Regression: SSE = ?¦(y_i-y ^_i )^2 SST = ?¦(y_i-y ¯ )^2 SSR= ?¦(y ^_i-y ¯ )^2 Coefficient of determination Correlation coefficient r= (?¦(x- x ¯ )(y- ¯y) )/v((?¦(x- ¯x)^2 )(?¦(y- ¯y)^2 ) ) or r= (?¦XY- (?¦?X ?¦Y?)/N)/v((?¦X^2 – (?¦X)^2/N)(?¦Y^2 – (?¦Y)^2/N) ) R2 =(?r(xy ))?^2
Testing for Significance
Confidence Interval for ß1
b_1±t_(a/2) s_(b_1 )
Multiple Regression:
F distribution
Submission Directions:
The assignment will be submitted via Blackboard. Each student will be permitted only ONE submission to Blackboard. You need to ensure that the document submitted is the correct one.
Academic Integrity
Holmes Institute is committed to ensuring and upholding Academic Integrity, as Academic Integrity is integral to maintaining academic quality and the reputation of Holmes’ graduates. Accordingly, all assessment tasks need to comply with academic integrity guidelines. Table 1 identifies the six categories of Academic Integrity breaches. If you have any questions about Academic Integrity issues related to your assessment tasks, please consult your lecturer or tutor for relevant referencing guidelines and support resources. Many of these resources can also be found through the Study Skills link on Blackboard.
Academic Integrity breaches are a serious offence punishable by penalties that may range from deduction of marks, failure of the assessment task or unit involved, suspension of course enrolment, or cancellation of course enrolment.
Table 1: Six categories of Academic Integrity breaches
Plagiarism Reproducing the work of someone else without attribution. When a student submits their own work on multiple occasions this is known as self-plagiarism.
Collusion Working with one or more other individuals to complete an assignment, in a way that is not authorised.
Copying Reproducing and submitting the work of another student, with or without their knowledge. If a student fails to take reasonable precautions to prevent their own original work from being copied, this may also be considered an offence.
Impersonation Falsely presenting oneself, or engaging someone else to present as oneself, in an in-person examination.
Contract cheating Contracting a third party to complete an assessment task, generally in exchange for money or other manner of payment.
Data fabrication and falsification Manipulating or inventing data with the intent of supporting false conclusions, including manipulating images.
Source: INQAAHE, 2020
If any words or ideas used the assignment submission do not represent your original words or ideas, you must cite all relevant sources and make clear the extent to which such sources were used.
In addition, written assignments that are similar or identical to those of another student is also a violation of the Holmes Institute’s Academic Conduct and Integrity policy. The consequence for a violation of this policy can incur a range of penalties varying from a 50% penalty through suspension of enrolment. The penalty would be dependent on the extent of academic misconduct and your history of academic misconduct issues.
All assessments will be automatically submitted to Self-Assign to assess their originality.
Further Information:
For further information and additional learning resources please refer to your Discussion Board for the unit.
END OF TUTORIAL ASSIGNMENT
Submission instructions:
Save submission with your STUDENT ID NUMBER and UNIT CODE e.g. EMV54897 HI6007
Submission must be in MICROSOFT WORD FORMAT ONLY
Upload your submission to the appropriate link on Blackboard
Only one submission is accepted. Please ensure your submission is the correct document.
All submissions are automatically passed through SafeAssign to assess academic integrity

GET SOLUTION FOR THIS ASSIGNMENT

CLICK HERE TO MAKE YOUR ORDER

TO BE RE-WRITTEN FROM THE SCRATCH

NO PLAGIARISM

  • Original and non-plagiarized custom papers. Our writers develop their writing from scratch unless you request them to rewrite, edit or proofread your paper.
  • Timely Delivery. capitalessaywriting.com believes in beating the deadlines that our customers have imposed because we understand how important it is.
  • Customer satisfaction. Customer satisfaction. We have an outstanding customer care team that is always ready and willing to listen to you, collect your instructions and make sure that your custom writing needs are satisfied
  • Privacy and safety. It’s secure to place an order at capitalessaywriting.com We won’t reveal your private information to anyone else.
  • Writing services provided by experts. Looking for expert essay writers, thesis and dissertation writers, personal statement writers, or writers to provide any other kind of custom writing service?  film dealing with the march on Washington on August 28, 1963
  • Enjoy our bonus services. You can make a free inquiry before placing and your order and paying this way, you know just how much you will pay. Identify the type of data and measurement scale for each with relevant justifications.
  • Premium papers. We provide the highest quality papers in the writing industry. Our company only employs specialized professional writers who take pride in satisfying the needs of our huge client base by offering them premium writing services.

Get Professionally Written Papers From The Writing Experts 

Green Order Now Button PNG Image | Transparent PNG Free Download on SeekPNG Our Zero Plagiarism Policy | New Essays