Tag: protocol

Categories
Writers Solution

The Wireshark protocol analyzer has limited capabilities and is not considered multi-faceted.

20 questions , multiple choice

Question 1

1.       Which of the following statements is true?

[removed] The Wireshark protocol analyzer has limited capabilities and is not considered multi-faceted.
[removed] Wireshark is used to find anomalies in network traffic as well as to troubleshoot application performance issues.
[removed] Both Wireshark and NetWitness Investigator are expensive tools that are cost-prohibitive for most organizations.
[removed] NetWitness Investigator is available at no charge while Wireshark is a commercial product.

5 points   

Question 2

1.       Wireshark capture files, like the DemoCapturepcap file found in this lab, have a __________ extension, which stands for packet capture, next generation.

[removed] .packcng
[removed] .paccapnextg
[removed] .pcnextgen
[removed] .pcapng

5 points   

Question 3

1.       The Wireless Toolbar (View > Wireless Toolbar) is used only:

[removed] when using a pre-captured file.
[removed] when capturing live traffic.
[removed] when reviewing wireless traffic.
[removed] in a virtual lab environment.

5 points   

Question 4

1.       In the frame detail pane, which of the following was a field unique to wireless traffic, confirming that it is a wireless packet?

[removed] The Encapsulation type: Per-Packet Information header
[removed] The Arrival time: May 11, 2007 15:30:37 041165000 Pacific Daylight Time
[removed] The Capture Length: 181 bytes
[removed] The Epoch Time: 1178922637.041165000 seconds

5 points   

Question 5

1.       Which of the following tools provides information about the antennae signal strengths, noise ratios, and other antennae information during a captured transmission?

[removed] Windows Explorer
[removed] DemoCapture
[removed] Wireshark
[removed] NetWitness

5 points   

Question 6

1.       Which of the following can be used to map who is able to communicate with whom, the measured strength of signals, and what frequencies are used, as well as be used for jamming certain frequencies and for determining which devices were likely used to set off remote bombs and Improvised Explosive Devices (IEDs)?

[removed] MAC+PHY (MAC and Physical Layer)
[removed] IEEE Layer
[removed] Flags fields
[removed] Quality of Service information

5 points   

Question 7

1.       In the IEEE 802.11 Quality of Service information and Flags fields, Wireshark displays information about the __________, which enables the network administrator to determine which Media Access Control (MAC) addresses match each of them.

[removed] antennae and signal strength
[removed] transmitters and receivers of the data
[removed] payload and frame information
[removed] Domain System and Internet Protocol version

5 points   

Question 8

1.       In the lab, Wireshark displayed the transmitter/receiver address in both full hexadecimal (00:14:a5:cd:74:7b) and a kind of shorthand, which was:

[removed] IEEE 802.11.
[removed] GemtekTe_IEEE.
[removed] GemtekTe_00:14:a5.
[removed] GemtekTe_cd:74:7b.

5 points   

Question 9

1.       Matching the __________ to their appropriate transmitter and receiver addresses can provide the needed forensic evidence of which devices are involved in a particular communication.

[removed] MAC addresses
[removed] IP addresses
[removed] brand names
[removed] IEEE numbers

5 points   

Question 10

1.       Which of the following statements is true regarding the fields displayed in Wireshark?

[removed] There are hundreds of fields of data available and there are many different ways to interpret them.
[removed] There are a few dozen fields of data available but there are many different ways to interpret them.
[removed] There are very few fields of data available and most administrators will interpret them in the same or a similar way.
[removed] Although there are very few fields of data available, most administrators will interpret them differently.

5 points   

Question 11

1.       Which of the following is a packet capture add-on that is frequently installed with Wireshark that enables the capture of more wireless information?

[removed] 3Com
[removed] QoS
[removed] GemtekTE
[removed] AirPcap

5 points   

Question 12

1.       Regardless of whether the packet is sent through the air or on a wire, the ultimate payload in an investigation is:

[removed] information regarding the transmitters and receivers of the data.
[removed] detail about the Internet Protocol version.
[removed] a Domain Name System query.
[removed] evidence of any suspicious activity.

5 points   

Question 13

1.       In the lab, the DNS query indicated an IP address of __________ for www.polito.it.

[removed] 172.30.0.100
[removed] 130.192.73.1
[removed] 177.390.13.6
[removed] 172.30.121.1

5 points   

Question 14

1.       What is the actual Web host name to which www.polito.it is resolved?

[removed] web01.polito.gov
[removed] web01.polito.it
[removed] web01.polito.com
[removed] www.polito.com

5 points   

Question 15

1.       In order to use NetWitness Investigator to analyze the same packets that you analyzed with Wireshark, you first had to save the DemoCapturepcap.pcapng file in the older __________ format.

[removed] .libpcap
[removed] .tcpdump-libcap
[removed] .pcapng
[removed] .pcap

5 points   

Question 16

1.       Which of the following statements is true regarding NetWitness Investigator?

[removed] NetWitness Investigator is available for free so it is only used for some initial analysis.
[removed] NetWitness Investigator is often used only by skilled analysts for specific types of analysis.
[removed] Investigators with little training typically can capture needed information using NetWitness Investigator.
[removed] Wireshark provides a more in-depth, security-focused analysis than NetWitness Investigator.

5 points   

Question 17

1.       Which of the following statements is true regarding NetWitness Investigator reports?

[removed] NetWitness reports contain only low-level wireless information, such as command and control.
[removed] NetWitness reports do not provide the kind of sophisticated analysis that is found within Wireshark.
[removed] NetWitness and Wireshark both provide the same information but the two tools differ in how that information is displayed.
[removed] NetWitness is unable to provide information about the geographic location of the transmitter and receiver.

5 points   

Question 18

1.       Which of the following tools displays the MAC address and IP address information and enables them to be correlated for a given capture transmission?

GET THE COMPLETED ASSIGNMENT

ASSIGNMENT COMPLETED AT CapitalEssayWriting.com

MAKE YOUR ORDER AND GET THE COMPLETED ORDER

CLICK HERE TO ORDER THIS PAPER AT CapitalEssayWriting.com ON  The Wireshark protocol analyzer has limited capabilities and is not considered multi-faceted.

NO PLAGIARISM, Get impressive Grades in Your Academic Work

[removed] DemoCapture
[removed] Wireshark
[removed] NetWitness Investigator
[removed] Both Wireshark and NetWitness Investigator

5 points   

Question 19

1.       When you were using NetWitness Investigator in the lab, the Destination City report indicated that the Destination Organization of www.polito.it was recorded as:

[removed] Turin Polytechnic.
[removed] Politecnico de Tourino.
[removed] Republic of Italia.
[removed] Turin, Italy.

5 points   

Question 20

1.       Which of the following statements is true regarding the information in the Destination City report?

[removed] The Top Level Domain (TLD) “.it” belongs to Italy.
[removed] The Top Level Domain (TLD) “.it” is proofthat the Web site is physically located in Italy.
[removed] The Top Level Domain (TLD) was actually registered in the United States.
[removed] It indicates that it will be impossible to determine the actual physical location of the server
Categories
Writers Solution

What is the purpose of a routing protocol

• Using the course materials, the textbook, and Web resources, research distance-vector routing protocols with a high concentration on the versions of RIP. Use the following questions to help you format your research paper:What is the purpose of a routing protocol and how does it differ from a routed protocol?
o What is a distance-vector routing protocol?
o What is a link state routing protocol?
o What are the advantages and disadvantages of distance-vector protocols?
o What are the advantages and disadvantages of link state protocols?
o What is RIP?
o What is OSPF?
o What are the two versions of RIP, and what are their specific purposes?
o When would you employ RIP, and when would you employ OSPF?
o Describe what is necessary to enable OSPF routing.

• Compile your responses to the above questions in a Word document of 3-5 pages.
Your submitted assignment must include the following:
• A Word document of 3-5 pages, double-spaced, excluding the title page and reference section. All references should be in APA format. You may find that using section headings and bullets make the paper more readable.
Please use reference

CCENT/CCNA ICND1 Official Exam Certification Guide (CCENT Exam 640-822 and CCNA Exam 640-802) by Odom
Pearson 3 9781323641729 1701B ITNA355-01

SEE SOLUTION BELOW

CLICK HERE TO MAKE YOUR ORDER

TO BE RE-WRITTEN FROM THE SCRATCH

NO PLAGIARISM

Get Professionally Written Papers From The Writing Experts 

Distance-Vector Routing Protocols

This paper discusses the distance-vector routing protocols with more emphasis on RIP versions.  Routing protocols basically entails network protocols used to advertise and learn connected networks and available network paths or routes. The main purpose of a routing protocol is to learn routes for Routed protocols (RP) and Internet Protocols (IP). A routed protocol is a network protocol used to transfer data to different networks. A routing protocol differs from a routed protocol in the sense that it has the capacity to learn about a network when a new one is added while at the same time detecting when the existing network is unavailable (Ross & Kurose, 2016). The other difference is that routed protocols are normally available in any device that participates in network communication, for example computers, routers and switches. A routing protocol on the other hand is only available in routers, network serves with Network Operating Systems (NOP) and Layer 3 switches. They are not available in printers and computers.

Distance vector routing protocol utilizes distance to decide………………………………………………………………………………………………………………………………………………………………………………………………………………………………….

………………………………………………………………………………………………………………………………………………………………………………………………………………………………….

………………………………………………………………………………………………………………………………………………………………………………………………………………………………….

Green Order Now Button PNG Image | Transparent PNG Free Download on SeekPNG Our Zero Plagiarism Policy | New Essays  

Categories
Writers Solution

Configuration of Internet Protocol

You are Sam Smith, a network technician with Global Packaging. You have been asked to configure the Internet Protocol (IP) address and subnet mask on a local host computer to enable IP connectivity. For this assignment, include the following:•Write a summary explaining why the IP address and subnet mask enable computers to communicate with each other on that network. •Briefly explain how you know that the host computer was placed on the correct subnet. •Discuss the relationship between IP addressing, DNS and DHCP. •Describe briefly the different types of network messages. •Provide relevant research to support your statements. •Submit your individual work in a Word document approximately 1-3 pages in length to the Small Group submission area. 

…………………………………………………………………………………………………

SEE SOLUTION BELOW

ASSIGNMENT COMPLETED AT https://capitalessaywriting.com

MAKE YOUR ORDER AND GET THE COMPLETED ORDER

NO PLAGIARISM

Configuration of Internet Protocol

(Course Instructor)

(University Affiliation)

(Student’s Name)

Configuration of Internet Protocol

            All personal computers, just like the houses that we live, need addresses when on the network or in the internet (Gupta, 2006). Although some operating system may automatically assign the computers the Internet Protocol (IP) address, sometimes we may be required to assign the IP address manually, if the system cannot. The configuration of the IP address requires a valid IP address and filling of the subnet task. The subnet task is responsible for the identification of the address that identifies the host PC and the part that identifies the network.

Why the IP Address and Subnet Mask Enable Computers to Communicate With Each Other On the Network           The success of the use of IP address as the internet network protocol draws largely from its ability to allow a connection of networks of different sizes and different systems (Gupta, 2006). The IP address for each computer is unique, which identifies, and separates the host on the network. The networks are often divided into three main classes of predetermined sizes, which the administrator can then subdivide into smaller sub networks. The process of subdividing network into smaller sections of networks is called subnetting. This process is very useful because it helps in the isolation of groups…………………………………………………………………………………………………………………………………………………………………………………………………………………………….

GET THE COMPLETED ASSIGNMENT

ASSIGNMENT COMPLETED AT CapitalEssayWriting.com

MAKE YOUR ORDER AND GET THE COMPLETED ORDER

CLICK HERE TO ORDER THIS PAPER AT CapitalEssayWriting.com

NO PLAGIARISM 

Categories
Writers Solution

Internet Protocol Suite

The internet protocol suite is a collection of communications protocols commonly utilized in networks. Although this suite is commonly known as TCP/IP, these are only two of the many protocols necessary for network communications.

Utilize the Internet and the Walden University library to research the internet protocol suite.

Choose one protocol to share with the class. You should choose a different protocol than your classmates. Please check the discussion board before posting to ensure you select a unique protocol. Please utilize your post title to identify your chosen protocol so that it is easy for others both to know what your post regards and to quickly scan to identify what protocols have already been explained in the discussion.

In your post, you should identify both the acronym and full name for the protocol and should describe how the protocol is utilized and what information is transferred. Be sure to include the layer at which the protocol operates and describe what happens at that layer


  1. Assignment status    : Solved by our Writing Team at PrimeWritersBay.com
  3. CLICK HERE TO ORDER THIS PAPER AT PrimeWritersBay.com
  4. GET THIS PAPER COMPLETED FOR YOU FROM THE WRITING EXPERTS
  5. NO PLAGIARISM